Mounting kits are designed for installing the fuel flow meters DFM into the fuel system using fuel pipe (Ø=8 mm and Ø=10mm).
To ensure minimal resistance to the fuel flow it is recommended to use mounting kit Number 4, designed for the fuel pipe with a diameter 10 mm.
Attention! The longevity and accuracy of fuel flow meters depend on mounting kit components quality.
HIGH QUALITY MOUNTING KIT
• sealing washers are made from a high quality soft copper (not aluminum!);
• drive type nipples are made from steel (not aluminum!);
• nipples, valves, hollow screws have bores for sealing;
• mounting kit components have corrosion protection..
|View||Part name||Description||Kit N.2||Kit N.4||MK DFM DIFF-01|
|Hollow screw 026||For connecting single fuel pipe using drive type nipple with fuel system units: high pressure fuel pump or fine filter.||3||3||6|
|Hollow screw 027||For connecting two fuel pipes using drive type nipples with fuel system units: high pressure fuel pump or fine filter.||1||1||-|
|Screw M8х16||For fastening the meter to the bracket.||4||4||4|
|Nut M8||For fastening the meter to the bracket.||4||4||4|
|Flat washer 8||For fastening the meter to the bracket.||4||4||4|
|Spring washer 8.65G||For fastening the meter to the bracket.||4||4||4|
|Copper sealing washer D18||For sealing the connections between the components.||16||16||16|
|Copper sealing washer CU 2026||For sealing the connections between the components.||1||1||-|
|Non-return valve K1 (white valve)||For avoiding the hydraulic shocks effect on the meter measuring accuracy. 0.35-0.5 Atm.||1||1||2|
|Bypass valve K2 (red valve)||For dissipating on the output of high pressure fuel pump.||1||1||-|
|Drive type nipple TR10||For connecting the fuel pipe Ø=10 mm with fuel system units.||-||8||8|
|Drive type nipple TR8||For connecting the fuel pipe Ø=8 mm with fuel system units.||8||-||-|
|Hose clamp 008||For fixing the fuel pipe on the drive type nipple.||8||8||8|
|Nipple 012||For connecting the fuel line to return fuel line through a bypass valve.||1||1||-|
|Nipple 015||For connecting the return fuel line to fine filter through a bypass valve.||1||1||-|
|Nipple 016||For joining single fuel line with heater line.||1||1||-|
|Nipple 016-01||For joining two fuel lines with heater line.||1||1||-|
|Plug||For plugging the return line hole when tranferring the line.||1||1||-|